schulink SC1344 Manual Del Usuario página 9

5. The HOME screen shows all connected chargers.
Swipe left on a charger to bring up the screen to
delete the charger or edit the charger information.
To add additional chargers, select Add Charger.
The App can accommodate up to 12 different
chargers. Use one of the arrows on the right to
select the charger you want to monitor.
THE STATUS SCREEN
NOTE: Tap any
A. Charge Indicator Ring – The color of this ring and the amount of the circle that
is filled indicates the charge level. A completely green ring indicates the battery
is fully charged. This corresponds to the percentage displayed in the center.
B. Charge Time – The amount of time needed to charge the battery when it was
first connected.
C. Charge Pause Switch – Tap the sliding
switch to start or pause the charging
process. The current status is shown
above the switch. You can pause the
charge while watching the voltage drop
to see if there is a power draw from the
battery. The charging process will not be
reset unless the charger is unplugged
and plugged in again. NOTE: This
charger is also a maintainer and it is not
necessary to stop the charging process;
the charger will automatically switch to
maintenance mode when the battery is
fully charged.
D.
Connected to a wireless network –
When the icon is green, this indicates
the charger is connected to a wireless
network. When the charger is not
connected to a wireless network, the
icon turns gray. Tap the
signal strength.
icon to bring up more information.
to check the
G
• 9 •
B
A
C
H
D E F
I