Switching On; Switching Off; Storing The Machine - Stihl HSE 52 Manual De Instrucciones

Switching On

Make sure you have a secure and
N
firm footing.
Stand upright – hold the power tool
N
in a relaxed position.
Make sure the cutting attachment is
N
not touching the ground or any other
objects.
Hold the power tool with both hands
N
– one hand on the control handle –
one hand on the loop handle.
2
1
3
Push the switch lever (1) against
N
the loop handle and hold it there.
Push down the trigger switch
N
lockout (2), depress the trigger
switch (3) and hold them in that
position.
The machine is designed for two-hand
operation, i.e. it will run only when the
switch lever (1) and trigger switch (3)
are operated simultaneously.
HSE 52

Switching Off

2
1
Release the trigger switch (1) and
N
the switch lever (2).
During longer work breaks –
N
disconnect the plug from the power
supply.
When the machine is not in use,
N
shut it off so that it does not
endanger others.
Secure it against unauthorized use.
N

Storing the Machine

For periods of 3 months or longer
Clean the cutting blades, check
N
condition and spray with STIHL
resin solvent.
Fit the blade scabbard.
N
Thoroughly clean the machine,
N
especially the cooling air inlets.
Store the machine in a dry, locked
N
location – the blade scabbard can
be mounted to the wall for this
purpose – out of the reach of
children and other unauthorized
persons.
English
13