Dandy Designer DER244BSS Manual De Propietario página 18

PREPARE TO INSTALL THE RANGE
TOOLS YOU WILL NEED
Drill with 1/8" bit
Adjustable Wrench
P e i l s r
1/4" Nut Driver
Phillips Screwdriver
(1) REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to remove packaging materials could result in damage to the appliance.
(2) PREPARE THE OPENING
• Allow 2" spacing from the range to adjacent vertical walls above the cooktop surface. Allow 30" minimum clearance
between the surface elements and the bottom of unprotected wood or metal top cabinets, and 15" minimum between
the countertop and the adjacent cabinet bottom.
• To eliminate the risk of burns or re when reaching over hot surface elements, cabinet storage space above the
cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by
installing a range hood that protrudes at least 5" beyond the front of the cabinets. Cabinets installed above a cooktop
may be no deeper than 13".
2"
36" max.
Wall Mounted
Wall
Outlet box
2¼"
Floor
Recommended acceptable electrical outlet area.
Orient the electrical receptacle so the length is parallel to the floor.
INSTALLATION INSTRUCTIONS
Safety Glasses
Tape Measure
P e n l i c
Level
Flat-blade Screwdriver
B
13"
30" min.
max.
15" min.
A
5" 2½"
C
41¾"
height
Surface
mount 36" ¾ ± ¼"
outlet
D
(Depth
with door
open)
Cord
PARTS INCLUDED
Anti-Tip Bracket Kit
Flooring under the range
• Your range, like many other household
items, is heavy and can settle into soft
fl oor coverings such as cushioned vinyl or
From
combustible
carpeting.
walls above
cooking surface
• When moving the range on this type of ooring,
either side
it should be installed on a 1/4" thick sheet of
plywood (or similar material) as follows:
• When the oor covering ends at the front of the
range, the area that the range will rest on should
be built up with plywood to the same level or
higher than the oor covering. This will allow the
range to be moved for cleaning or servicing.
Model
20" Wide
24" Wide
16
A B C
19¾" 19¾"min 2"
23¾" 23¾" min 2"
D
44⅜"
44⅜"