HT HT3302 Manual De Instrucciones página 31

Fig. 12: Activation of backlight function on measurement
20. The symbol "Lite" flashes on the display. Move the J key to "+" or "-" to enable (ON) or
disable (OFF) the backlight function of the display upon pressing the T key (backlight
will deactivate automatically 5 seconds after measurement is finished).
21. Press the J key to confirm selection and go on to next item.
Fig. 13: Activation of Auto Power OFF (APO) function on measurement
22. The symbol "APO" flashes on the display. Move the J key to "+" or "-" to enable of
disable (OFF) the Auto Power OFF function of the instrument. In case of activation, it is
possible to set the value between 1s and 60s (the instrument switches off automatically
anyway after 5 minutes' idling).
23. Press the J key to confirm selection and move the key to "MENU" to go back to
measuring mode.
EN - 10
HT3302