Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly of the Railing
15. A ssemble the parts C28 by using the parts C13, B02 and insert them into the balusters (C12)
(fig. 1).
16. I nsert the balusters (C12) into the parts F23, blocking them by the part B02.
17. T he first balusters (C12) of the long side of every tread (L40) have to be cut.
18. T ighten the part C28 completely, by using the part B02 (fig. 1). For a correct assembly twist the
key at about 90° from the contact point.
Final Assembly
19. C ontrol the vertical line of the whole stair and, if necessary, correct it by moving the support N16
(fig. 1).
20. D isassemble the first tread (L40) and drill the floor with a Ø 14 mm tip in relation to the present
holes on the support N16 (fig. 1).
21. I nsert the parts F20 and tighten completely (fig. 1).
22. R eassemble the first tread (L40) and fix on the floor, in relation to the first baluster (C12), the part
F01, by drilling with a Ø 8 mm tip. Use the parts C58, B12, B83 and B02 (fig. 1).
23. Insert the baluster (C12) and tighten the part B02 (fig. 1).
7 - Fokus 030
Publicidad
