Miele PFD 101 Instrucciones Breves De Manejo página 34

en - Warning and Safety instructions

There must be no electrical sockets behind the dishwasher.
Danger of overheating and fire risk if the dishwasher were to be
pushed up against a plug. See "Electrical connection".

Do not connect the dishwasher to the mains electricity supply via
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

Never open the casing of the dishwasher. Any contact with live
connections or tampering with the electrical or mechanical compon-
ents of the dishwasher will endanger your safety and may lead to ap-
pliance malfunctions.

The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be re-
placed by a suitable connection cable of the same type. For safety
reasons, such replacement may only be carried out by the Miele
Customer Service Department or a qualified service technician.

The dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.

The plastic housing of the water connection contains electrical
components. It must not be dipped in water.

There are electrical wires in the water inlet hose. Do not shorten
the water inlet hose, even if it is too long.

The integrated Waterproof system offers protection from water
damage, provided that the following conditions are met:
- Installation has been carried out correctly.
- The dishwasher is properly maintained and parts are replaced
where it can be seen that this is necessary.
- The stopcocks have been turned off during longer periods of in-
activity (e.g. whilst on holiday).
34