bosal 006-228 Manual Del Usuario página 4

6.
Draw end of bunch with
to lights. Disconnect plug connection near standing lights. Connect 6-input joint of electric
bunch to standing lights and both remaining casings connect to each other.
Draw remaining end of bunch to right standing lights. Disconnect plug connection near standing lights. Connect
7.
6-input joint of electric bunch to standing lights and both remaining casings connect to each other.
Only in 13-polar set.
8.
Connect
sheet metal screw; do not secure the hole with anti-corrosion agent).
Trailer power supply:
9.
Only for 13-polar version. 3-input housing (red/blue, yellow and white/brown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
cables to earth (e.g. drill a 3 mm hole, connect and fix it the eyelet terminal with
grey and (additionally brown in 7-polar set)
part no. 014-169
part no. 015-069