Publicidad
Idiomas disponibles
Idiomas disponibles
•
Keep hands, loose clothing & long hair away from the reaction arm and working area during
operation.
•
This tool will exert a strong reaction force. Use proper mechanical support and correct
reaction arm positioning to control these forces. Do not position the reaction arm so that it
tilts the tool off the axis of the bolt and never use the swivel inlets as a reaction stop.
•
Avoid sharp bends and kinks that will cause severe back-up pressure in hoses an lead to
premature hose failure.
•
Use accessories recommended by the manufacturer.
•
Use only impact sockets and accessories.
•
Use only sockets and accessories that correctly fit the bolt or nut and function without tilting
the tool off the axis of the bolt.
•
This tool is not insulated against electric shock.
•
This equipment must not be operated or serviced unless the operator read the operating
instructions and fully understands the purpose, consequences and procedure of each step.
When operating a larger tool (56581, 56582 or 56583) above waist height, employ a
secondary means of support for safety purposes. A tool sling or chains may be used. Consult
your safety department for further suggestions.
Depending on the working environment your local health and safety regulations may require
you protective gear (i.e. Ear Protection, Safety Shoes, Hard Hat, Gloves, Coveralls, etc.) In case
external forces are exerted on the equipment, non-compliance with these regulations may result
in injury.
EAR PROTECTION MUST BE WORN WHEN OPERATING THIS TOOL.
26
Keep body stance balanced and firm. Do not overreach when
operating this tool.
The Torque Reaction Arm must be positioned against a positive stop.
Do not use the arm as a dead handle. Take all precautions to
make certain the operator's hand cannot be pinched between the
arm and a solid object.
USING THE TOOL
Publicidad
