Control Panel - Mellerware Loopy! Track Manual Del Usuario

ESPAÑOL
Description
A – Seat
B – Seat regulator knob
C – Seat height regulator knob
D – Bottle holder
E – Intensity regulator knob
F – Pulsation sensor
G – Handlebar
H – Handlebar height regulator knob
I – Flywheel
J – Adjustable feet
K – Pedals
L – Wheels

Control panel

M – Mode button
N – Time indicator
O – Speed indicator
P – Distance indicator
Q – Calories indicator
R – Scan function
S – Pulse indicator
T – Clear button
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
ASSEMBLING INSTRUCTIONS:
Fig.1
Place the end caps (12) into the front
–
and rear stabilizers (10,11).
– Place the front stabilizer (10) to the
main frame (1) using the screws (15)
provided.
– Place the rear stabilizer (11) to the main
frame (1) using the screws (15) provided.
Fig.2
Fix the seat (9) to the seat post (14).
–
Slide the seat post (14) into the vertical
–
seat post (8) and fix it in the desired
place with the locking knob (13).
– Insert the vertical seat post (8) into the
main frame (1). Secure the saddle in
position with the seat height regulator
knob. The height of the seat can be
adjusted after the bike is fully
assembled.
Fig.3
Fix the handlebar (6) with the handlebar
–
post (2) with the screws provided (16).
– Place the piece (5) as indicated.
Place the handlebar post on the main
–
frame (1) and fix it with the handlebar
height adjuster.
–
Place the monitor (3) with the bracket
(4) and then fix it to the handlebar (6).
Fig.4
Fix the pedals (7) into its crank arm.
–
– Failure to follow the instructions can
damage the crank or the pedal threads
The right-hand pedal, marked with letter
–
R, screws onto the right-hand crank, also
marked with R, in clockwise direction till
tight.
– The left-hand pedal, marked with letter
L, screws onto the left-hand crank, also
marked with L, in a counter-clockwise
direction till tight.
EN ES