Control Panel - Mellerware Loopy! Path Manual Del Usuario

ESPAÑOL
Description
A – Seat
B – Seat regulator knob
C – Seat height regulator knob
D – Intensity regulator knob
E – Handlebar
F – Handlebar regulator knob
G – Handlebar height regulator knob
H – Bottle holder
I – Flywheel
J – Adjustable feet
K – Pedals
L – Wheels

Control panel

M – Mode button
N – Time indicator
O – Speed indicator
P – Distance indicator
Q – Calories indicator
R – Scan function
S – Clear button
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
ASSEMBLING INSTRUCTIONS:
Fig.1
– Place the front stabilizer (9) to the
main frame (1) using the screws (12)
provided.
– Place the rear stabilizer (10) to the
main frame (1) using the screws (12)
provided.
Fig.2
Place the handlebar post (2) into the
–
main frame (1) and fix it with the
handlebar height adjuster.
Fix the monitor holder (4) on the
–
handlebar (5).
Fix the monitor (3) on the monitor
–
holder (4).
Connect the monitor cable to the
–
input behind the monitor.
Fig.3
For packaging reasons, the seat
–
post (7) was fixed by default on
the main frame tube in an opposite
way. Take it out from the main
frame first.
Then, turn it to the correct way and
–
fix it into the main frame with the seat
height regulator knob.
Fig.4
Place the seat tube (11) into the
–
vertical seat post (7) and fix it with
the seat regulator knob.
Fit the saddle bracket onto the seat
–
tube (11), then fit the seat (8) into
position and tighten the nuts on the
bracket securely.
Fig.5
– Fix the pedals (6) into its crank arm.
– Failure to follow the instructions can
damage the crank or the pedal
threads.
– The right-hand pedal, marked with
letter R, screws onto the right-hand
crank, also marked with R, in clockwise
direction till tight.
EN ES