Care And Maintenance - Garden Treasures FOU-515345 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
4. Fit the groove on the bottom of the upper board (C)
onto the edge of the upper barrel (D) to attach the two
assemblies. Then, connect the long water tube (B) to
the outlet nozzle on the upper barrel (D).
5. Fill the fountain with about 3.7 gallons of water,
making sure the pump (G) is fully submerged. Then,
plug in item to nearest outlet.
Note: Adjust the flow of the water by rotating the front
screen of the motor. Do not adjust below 1/3 the full flow
rate.
CAUTION:
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
Always disconnect pump from electrical outlet before
putting hands in water.

CARE AND MAINTENANCE

• Keep water clean - using clean water will reduce mineral deposits, improve water clarity and
prolong the life of the pump.
• Clean the fountain periodically to prevent mineral deposits and contamination. Use a wet cloth to
gently wipe heavily stained surfaces. Do not use harsh chemicals or abrasives as this will damage
the finished surface.
• Add clean water periodically to ensure the pump is fully submerged in water.
• Disconnect the power and empty the basin if the fountain will not be used for an extended time.
If installed outdoors and in a freeze-prone area of the country, ensure all water is removed and
•
the unit is completely dry before temperatures drop too low. This product is NOT to be operated
below 41°F or freeze damage may occur.
4
C
Outlet
Nozzle
5
5
A
B
D