Sebson IR BS A Instrucciones De Manejo página 11

motion detector is activated after a warm-up phase of approx. 30s. If no further movement takes place in the
sensing area of the sensor, the sensor switches off.
Technical Data:
Operating voltage:
Maximum power consumption:
Consumption in standby:
Electrical protection:
Protection class:
Detection moving speed:
Ambient temperature:
Humidity:
Possibilities of adjustments:
Detection area:
Sensitivity when switching (with regard to
the ambient brightness):
Time setting (switching off delay):
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
Cleaning:
Danger:
Before start cleaning the product interrupt the current circuit by switching off the circuit breaker or
unscrew the fuse! Use a slightly moistened cloth for cleaning. In order not to damage the product, it is essential to
avoid water penetrating into the housing! Never clean the device under running water! Do not use solvent-
containing cleaner for cleaning.
CE Declaration of Conformity:
This product has been prepared according to the listed below guidelines:

LVD 2014/35/EU

EMC 2014/30/EU

RoHS 2011/65/EU
Address:
SEBSON
Sebastian Sonntag
Gernotstr.17
44319 Dortmund
220 -240V AC 50Hz
Max. 800W
Max. 200W
< 0,5W
IP20
II
0,6-1,5m/s
-20° - +40°C
<93%
3m/6m (<24°C)/360°
3m/6m (<24°C)/120°
10LUX/2.000LUX
5s, 30s, 1min, 3min, 5min, 8min
11