Kohler K-5826 Guia De Instalacion página 5

Cut Line
Rail
1. Prepare the Cabinet – False Drawer Front
For cabinets with flat fronts (no false drawer opening), proceed to
the "Prepare the Cabinet – Flat Front" section.
Remove the false drawer front from your cabinet. Use care not to
damage the cabinet.
TIP: Apply painter's tape to the cabinet to mark cuts and protect
cabinet surfaces when cutting.
Measure and mark 7/8" (22 mm) in from the outside edge of the
cabinet. Repeat for the other side.
Cut along each marked line until the cut extends slightly beyond
the top of the drawer opening/top rail of the cabinet.
Following the bottom edge of the rail, extend your cut until it
intersects with the previous cut. Repeat for the other side.
If your cabinet has a center support, cut along the bottom of the
support, even with the drawer opening.
Remove and discard the rail.
Kohler Co.
7/8" (22 mm)
Inside Wall
Center
Support
Rail
5 1159655-2-D