In The Event Of Problems - Beurer MG 230 Instrucciones Para El Uso

• The removable cover is machine-washable at 30 °C. Please follow the cleaning and care symbols
on the label which is sewn into the cover.
• Do not use the device again until it is completely dry.
Storage
To store the device, simply fold it and then fasten the device with the Velcro fastener. Next, store the cushion
in the pocket on the rear of the device.
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
CAUTION
• If you use the screw for transport locking, take care when using the device again that it is definitely
removed before switching on.

9. In the event of problems

Problem
Massage heads
rotating at
reduced speed.
Massage heads
only rotate in the
upper or lower
region.
Massage heads
not moving.
cause
The load on the massage
heads is too great.
The massage has been
activated for the limited
region.
Appliance not connected to
the power supply.
Device not switched on.
Transport lock has not been
removed, the massage
mechanism is damaged.
Overheating protection tripped,
device is damaged.
Remedy
Take note of the maximum weight capacity.
Press the FULL BACK, UPPER BACK or LOWER
BACK buttons to change the massage region.
Connect the plug to the mains supply and switch
on the appliance.
Switch the device on with
Select the massage region.
Contact your authorized dealer or the service
address.
Contact your authorized dealer or the service
address.
13
.