Safety Precautions; Symbols Used In The Manual; Symbols On The Implement - Deltafox DG-ETI 1540 Traducción Del Manual De Instrucciones Original

GB
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).

Safety precautions

This section deals with the basic
safety regulations while working
with the electric garden hoe.

Symbols used in the manual

Warning symbols with in-
formation on damage and
injury prevention.
70
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with informa-
tion on improving tool han-
dling.
Wear safety gloves
Pull out the mains plug.

Symbols on the implement

Caution!
Read the user manual
Caution! Protect from rain
and damp
Wear safety goggles
Wear safety gloves
Wear safety shoes
Danger of injury from ob-
jects spinning off! Keep sur-
rounding persons away form
the hazard area
Caution! Switch off the tool
and disconnect it from the
mains before carrying out
any cleaning or mainte-
nance work