English - Black and Decker BDS303 Manual Del Usuario

Intended use
This Black & Decker tool has been designed to help locate wooden studs, live wires
operating at mains voltage (230 V
This tool is intended for consumer use only.
Safety instructions
Warning! When using battery-powered tools, basic safety precautions, including the

following, should always be followed to reduce the risk of fire, leaking batteries, personal
injury and material damage.
Read all of this manual carefully before operating the tool.

Retain this manual for future reference.

Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work
area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the work area or to touch the tool.
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch what you are doing. Use common sense. Do not operate the tool when you are tired.
Use appropriate tool
The intended use is described in this instruction manual.
Warning! The use of any accessory or attachment or performance of any operation with this
tool other than those recommended in this instruction manual may present a risk of personal
injury.
Check for damaged parts
Before use, carefully check the tool for damage. Ensure that the tool will operate properly
and perform its intended function. Do not use the tool if any part is damaged or defective.
Store idle tools
When not in use, tools should be stored in a dry, locked up or high place, out of reach of
children.
) and metal pipes covered by wall boards.
AC

ENGLISH

5