Fitting The Reduction Sealing Ring - Minebea Intec PR 6130/04N Manual De Instalación

Cable Junction Box PR 6130/04N
4.6

Fitting the reduction sealing ring

EN-12
1. Unscrew the cap nuts (2).
2. Remove the existing sealing ring from the metal sleeve (3).
3. Insert the reduction sealing ring (1) in the M20 cable gland (for cables ≤8 mm).
Note:
It is essential to irst insert the side with the sealing lip in the metal sleeve!
4. Tighten the cap nuts (2) again.
4 Installation and connection information
Minebea Intec