Fitting The Reduction Sealing Ring/4-Seal Insert - Minebea Intec PR 6021/18 Manual De Instalación

4 Installation and connection information
4.5

Fitting the reduction sealing ring/4-seal insert

Minebea Intec
1. Unscrew the cap nuts (2).
2. Remove the existing sealing ring from the metal sleeve (3).
3. Insert the reduction sealing ring (1) in the M20 cable gland (for cables ≤8 mm).
Note:
It is essential to irst insert the side with the sealing lip in the metal sleeve!
4. Insert the 4-seal insert (4) in the M25 cable gland.
5. Tighten the cap nuts (2) again.
Weighbridge Cable Junction Box PR 6021/18
EN-13