Getting Started - Anker NEBULA Cosmos Max Manual Del Usuario

EN
3. Top View
4. Bottom View
4
1
5
2
6
7
3
8
9
5. LED Indicator
LED Status Description
Solid red Operating in projector mode
05
Tripod socket
Adjust Focus
Navigation
Back
Power On / Off
Press to activate Google
Assistant
Confirm the selected content
Home
System Settings
Volume Up / Down
Remote Control: Nebula RC
Model: D0413

Getting Started

1. Placement
Place this device on a stable, flat surface, and squarely point it to face the projection
surface. For best results, the projection surface should be white and flat. The distance
between this device and the projection surface must be a minimum of 31 inches (0.8
meters) and a maximum of 157 inches (3.98 meters) to get a projection image from 30
to 150 inches.
• It is unnecessary to tilt it towards the projection surface. You can
T
correct the projection image with the built-in keystone correction.
• The distance between the device and the projection surface
determines the projection image size. For the best result, set the
projector between 63 and 104 inches away.
• You can also mount your projector on the ceiling.
2. Prepare the Remote Control
The remote control comes with two AAA batteries.
① For first-time use, slide to open the battery compartment, and install two AAA
batteries.
EN
06