Greenlee 2007 POWER FINDER Manual De Instrucciones página 13

EXAMPLE 4
Tracing low voltage circuits (TEL-COM, HVAC CONTROLS,
SECURITY SYSTEMS, etc.)
1) To trace low voltage circuits (those typically of 50 volts or less),
connect one side of the transmitter adapter plug to a known
ground, and the other side to the low voltage HOT conductor,
as shown below.
2) Plug the transmitter into the transmitter adapter plug.
3) Operate the receiver as stated in EXAMPLE 1.
Greenlee Textron Inc. / Subsidiary of Textron Inc.
2007 POWER FINDER™ Circuit Tracer
4455 Boeing Dr., Rockford, IL 61109-2988 USA 815/397-7070
13