Using The Setup Menu - Bushnell FUSION X 10X42 El Manual Del Propietario

DISPLAY INDICATORS/ICONS
The Fusion™ X ranging binocular's display incorporates the following illuminated indicators:
Angle Range Compensation Modes:
1. Bow Mode
2. Rifle Mode
3. Battery Level Indicator
4. Aiming Circle/Dot
5. Active/Scan Laser Indicator
Targeting Modes:
6. BullsEye Mode
7. Brush Mode
8. Primary Numeric Display displays Line-of-sight Distance
Holdover / Bullet-drop Horizontal Distance indicators for Rifle Mode
9. MOA holdover units selected
10. MIL (holdover units selected
11. IN (inch) or CM (centimeter) holdover units selected
12. SD = Variable Sight-In Distance
13. Range (Distance) Units: Y=Yards, M=Meters
14. Secondary Numeric Display
(Holdover/bullet drop for Rifle mode, True Horizontal Distance for Bow Mode)
15. SETUP Mode
16. Angle Indicator
17. Power/Height Meter
TARGETING MODES
The Fusion™ X laser ranging binocular operates in three available targeting modes, with Standard mode as the default. To select a different targeting mode, press the Mode button
briefly until the desired indicator (BullsEye or Brush) appears. To return to Standard mode, press Mode one more time after the Brush mode indicator is seen. The targeting modes are:
• Standard Mode with Automatic SCAN (LCD Indicator – none) This setting allows most targets to be ranged, up to 1800 yards. Used for moderately reflective targets that
are typical of most distancing situations. The minimum distance in the standard model is 5 yards. To use the Automatic SCAN feature, press and hold the Fire button, then move
the ranging binocular from object to object while keeping the Fire button depressed. Automatic SCAN will allow the range to be continuously updated as multiple objects are
targeted. Crosshair lines flash while scanning.
• BullsEye™ Mode with Automatic SCAN (LCD Indicator (6) -
to background targets that have stronger signal strength. When more than one object has is acquired, only the distance of the closest object will be displayed.
With the ranging binocular in BullsEye mode, align the aiming circle onto the object (i.e., deer) that you want to distance. Next, press and hold the Fire button and move the
Aiming Circle slowly over the deer. If the laser beam recognized more than one object (deer and background trees), the distance of the closer object (deer) is displayed in the
LCD.
• Brush™ Mode with Automatic SCAN (LCD Indicator (7) -
background objects are displayed. When more than one object is acquired, only the distance of the farthest object is displayed on the LCD.
With the ranging binocular in Brush mode, align the aiming circle onto the object you want to find the distance. Next, press and hold the Fire button and move the Aiming
Circle slowly over the object. If the laser beam recognized more than one object (closeup tree branch and a deer in the background), the distance of the further object (deer)
would be displayed.
TIP: While pressing the Fire button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the
furthest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last targeting mode.

USING THE SETUP MENU

The Setup Menu is used to select various options, such as the ARC Mode (Bow, Rifle, etc.) and distance units (Yards or Meters) of your preference. After powering on the unit, enter
the Setup Menu and hold the Mode button down until "SETUP" appears in the display (15). You will remain in the Setup Menu until you change or confirm all possible settings (varies
depending on selected ARC mode), and "SETUP" is no longer displayed. Once in the Setup Menu, press the Mode button to scroll through or toggle the available items. Press the Fire
button to confirm and save the currently displayed option/setting.
The first item you can select from the Setup Menu is the ARC Mode. Press the Mode button until the icon for the mode you want is displayed. Press the Fire button to confirm and
continue selecting other related options/settings.
16
) This advanced mode allows easy acquisition of small targets and game without inadvertently getting distances
): This advanced mode allows objects such as brush and tree branches to be ignored so that distance only to
6 3 7
1
5
4
12
14
10
9
15
2
17
8
13
11
5