Product Information - Codonics Horizon SF Manual Del Usuario

Bold monospaced type is used to indicate specific characters or words that you enter at a host
workstation when performing advanced imager operations.
variable text. For example:
1. From your workstation, open a UNIX or MS-DOS command window.
2. Enter the command telnet
hostname or IP Address).
3. At the login prompt, enter the command status.
Important Information and Filenames
Bold type is used for emphasis, command names, and paths or filenames. For example:
The Horizon imager default settings can be changed both at the control panel and using text
•
files.
The hostname and IP Address must be added to the /etc/hosts file.
•
New Terms
Italic type
is used when a term is introduced and defined. For example:
The Horizon imager has a complete set of
•
every aspect of a printed sheet.
Purpose and Scope
Refer to this user manual for procedures on how to perform the most common imager
operations, including:
Setting up the imager
•
Loading media
•
Sending print jobs from DICOM Print Service Classcompliant applications running on imaging
•
devices or image viewing workstation
Sending print jobs from workstations via PostScript
•
Sending print jobs using FTP and LPR
•
Changing the imager's default image and sheet settings
•
Adjusting the appearance of printed images for user preference
•
Performing preventive maintenance
•
Performing film calibration
•
Troubleshooting common problems
•
NOTE: Some features and functions described here may not apply to older versions of the software.
This User's Manual is intended to be as simple and straightforward as possible for the everyday
user. If you need more detailed or more technical information on a feature or topic, or wish to
perform more advanced operations, refer to the
(Catalog no. HORIZON MNLT). The Technical Manual serves as a companion document to this
manual

Product Information

For technical assistance with the Horizon, call Codonics Technical Support at the following number:
Phone: +1.440.243.1198
Toll Free: 800.444.1198 (USA only)
hostname IP Address
or telnet
default settings
Horizon Imager Technical Manual
If the type is also italicized
(using either the Horizon imager
that contain preconfigured values for
, it indicates