Environmental Protection - BGS technic 9825 Manual De Instrucciones

OVERVIEW
1 Air inlet
2 Expansion valve
3
Release valve
4 Expansion arms
OPERATION
1. Put the CV boot over the expansion arms (4)
of the tool. Ensure that the CV boot is firmly
seated on the expansion arms.
2. Actuate expansion valve (2) to expand the
CV boot to the required size.
3. Slide tool with expanded CV boot over drive
shaft joint.
4. Actuate the release valve (3) to close the
expansion arms (4).
5. Slide the CV boot off the released
expansion arms (4).
6. Actuate the expansion valve (2) to open the
expansion arms and pull the tool over the
drive shaft joint.

ENVIRONMENTAL PROTECTION

Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment. Contact your local solid
waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed