Environmental Protection - BGS technic 6705 Manual Del Usuario

RECOMMENDED COMPRESSED AIR SYSTEM
No.
1 Air tool
2 Air hose
3 Quick coupling
Oiler
4 (for tools with motor)
5 Pressure reducer
SAFETY WHILE OPERATING
Take enough time for a careful selection of a working area. Take care that your workplace is near to
the compressor and blasting material. Attention! Always stay aware. Remove the device or other
objects from the working area. Persons and animals must not remain in the working area. Never
direct the air tool against persons or animals. Always wear safety equipment like safety glasses and
dust masks when working with this air tool (see chapter "Occupational Safety").
KOMPONENTEN
1 Blasting material collection bag
2 Trigger
3 Compressed air inlet
4 Flap for blast material
5 Fastening tab with hole (x2)
6 Rubber sealing ring for sealing the spark plug
USE
1. Loosen the clamp on the blasting material collection bag (1), remove the bag and fill blasting material
into the cleaning device.
2. Reattach the collection bag to the cleaning device with the clamp.
3. Connect the cleaning device to the compressed air system.
4. Insert the spark plug into the rubber sealing ring (6).
5. Press the trigger (2), let go of the trigger in between, remove the spark plug from the cleaning device
and check the cleaning result.

ENVIRONMENTAL PROTECTION

Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. Contact your local
solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Designation
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
No. Designation
6 Drainage/filtering unit
7 Drainage valve
8 Shut-off valve
9 Dryer/filter unit
10 Compressor
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed