Connect To A Wireless Network - Conceptronic 150N Manual De Usuario

This chapter will explain how you can connect to your wireless network by using the 150
and the Conceptronic Wireless Network Config Utility.
Note: If you have chosen to use the native drivers of Windows 7, or you have chosen "Install drivers only"
during the installation of the drivers & software in the previous chapter, the WPS functionality and the
Conceptronic Wireless Network Config Utility will not be available. Therefore, chapter 4.1 ~ 4.4 will not
apply for you. Continue to chapter 4.5 for information how you can connect to your wireless network.
4.1 The Conceptronic Wireless Network Config Utility
When the installation of the drivers & software is completed, the Conceptronic Wireless Network Config Utility
will be shown on your screen, displaying the wireless networks in your area:
If the wireless utility is not shown, double click on the system tray icon of the wireless utility:
Connecting to your wireless network can be done in two different ways: automatically using the Wi-Fi Protected
Setup (WPS) option or manually using the wireless utility.

4. Connect to a wireless network

ENGLISH
Wireless USB Adapter
N
11