EN
English
Getting started
Power on/off and pairing
To power on, place the earpieces in the charging case.
The left and right earbud will pair and turn on automatically.
To pair, open the lid of the charging case and go to Bluetooth
settings on your device and select "JAYS t-Seven" to pair with the
earphones. If the pairing fails, the earpieces will stay in pairing mode
for a few minutes until they finally power off.
To power off, place the earpieces in the charging case and they will
turn off automatically. If the Bluetooth
off, the earphones will turn off automatically.
Reconnecting and additional pairing
If the earpieces recognize a nearby previously paired Bluetooth
device when taken out of the charging case, they will pair
automatically to that certain device.
Charging the earpieces
Place the earpieces in the charging case, the charging will begin
automatically. The charging is indicated by the white LEDs on the
charging case . Left and right LED on the charging case will also be
lit when charging corresponding earpiece. When white LEDs turn off,
the earphones are fully charged.
Charging the case
Charge the case by connecting the included cable to the bottom of
the case and any certified USB power output. A full 100% charge will
take around 2.5 hours (depending on temperature and charger).
Battery status of the earpieces
When the battery level is running low, the promt voice will
automatically announce the current battery level in the earphones.
Resetting
To reset, place the earpieces in the charging case.
Press and hold the button on the back of the charging case for 10
seconds. The LED's will flash, once the LED's are turned of, the reset
is done.
®
®
on the paired device turns
®
Battery LED indicator
Battery status of the case
When the earpieces are placed in the case, the LEDs on
the case will display the battery level of the case.
Battery LED
Explanation
One light
25% battery
Two lights
50% battery
Three lights
75% battery
Four lights
100% battery