Russell Hobbs 22281 Manual De Instrucciones página 89

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
diagrams
1 tab
2 slots
3 cutters
4 slicer
5 coarse grater
6 fine grater
7 ring nut
3 Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and
understand the hazards involved.
• Children must not use or play with the appliance.
• Keep the appliance and cable out of reach of children.
s Misuse of the appliance may cause injury.
2 Unplug the appliance before assembly, disassembly, or cleaning.
3 Don't leave the appliance unattended while plugged in.
4 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
l Don't put the motor unit in liquid.
5 Don't use fingers or cutlery to push food down the tube – only the pusher.
6 Don't use the appliance for any purpose other than those described in these instructions.
7 Don't operate the appliance if it's damaged or malfunctions.
C ASSEMBLY
1 Switch the appliance off (0) and unplug it.
2 Choose the pair of cutters you need – slicer, coarse grater, fine grater.
S Don't try to fit the cutters to the cutter mount while holding it in the operating position
– you'll probably cut yourself.
3 Stand the cutter mount upright on the work surface.
4 Fit the tabs on the wide end of the cutter into the slots in the wide end of the cutter mount.
5 Press the tab on the narrow end of the cutter into the space in the narrow end of the cutter
mount.
6 Turn the cutter mount, then fit the second cutter.
7 Slide the cutter mount into the body.
8 Turn the ring nut 45° clockwise.
9 Push it on to the front of the body.
10 Turn it 45° anti-clockwise, to lock it in place.
8 bayonet fitting
9 cutter mount
10 body
11 tube
12 guides
13 pusher
14 cap
15 switch
household use only
SLICING/GRATING
89
16 motor unit
17 spanner
18 nozzle
19 shaft
` dishwasher safe
[

Publicidad

Tabla de contenido
loading

Tabla de contenido