ring RBGDC10 Instrucciones página 9

9. VIDEO OUTPUT
The dash camera can be connected to a TV or other compatible screen for direct playback of video and
images.
9.1 High Definition (HDMI)
1. Connect a suitable HDMI video cable (not supplied) to HDMI output on camera
2. Connect other end of cable to HDMI input on TV
3. Controls on dash camera can be used to navigate and select playback
9.2 Standard Definition (AV)
1. Connect a suitable 3.5mm video cable (not supplied) to AV output on camera
2. Connect other end of cable to AV inputs on TV
3. Controls on dash camera can be used to navigate and select playback
During playback it is recommended the Power adapter is connected to the camera, so the internal
battery does not become discharged.
10. SPECIFICATION
Model
Power Requirements
Car Power Adaptor
Sensor Resolution
Lens Type / Angle / Aperture
Recording Resolution (Max)
Screen Size / Ratio
Screen Resolution
Supported Card Type
Recording Time
(Max @ 1920x1080)
Recording Format
Video Out
Internal Battery
Unit Dimensions
Unit Weight
BGDC10 Instruction booklet.indb 9
RBGDC10
5V / 400mA
Input: 12V DC, Output: 5V DC
Fuse Type: 1¼" Quick Blow 3amp
3 Mega Pixels
4G / 120° / F2.5
1920 x 1080 @ 25fps
1.5" / 4:3
320(W) x 240(H) pixels
Micro SD, Class 6-10, 32GB (max)
Note:- Card not supplied
4GB MicroSD card = 40mins recording (max)
8GB MicroSD card = 80mins recording time (max)
16GB MicroSD card = 160mins recording time (max)
32GB MicroSD card = 320mins recording time (max)
AVI
High Definition: Mini HDMI (Type C) Socket
Standard Definition: 3.5mm Jack
3.7V / 200mAh Lithium Polymer
Note:- Battery is only a backup power source to ensure
recordings are completed in the event of a 12V power failure.
Maximum backup recording time is 5 minutes
107mm x 52mm x 36mm
65g
17/06/2015 11:2