Datalogic Magellan 2200VS Guía De Referencia Rápida página 10

Green LED Indicator
The green LED indicates scanner status as shown in the table below..
Table 2. Green LED Indications
LED
INDICATION
a
Scanner (Green) LED on steady and
Scanner Active
dim
(Normal Mode)
Good Read
Scanner (Green) LED - bright flash
a
Indication
Scanner (Green) LED - Continuous
Program Mode
flashing
Indication
Sleep Mode
Scanner (Green) LED flashes slowly
Indication
Scanner (Green) LED 1-second off, 1/
Host Disabled
10-second on
Audible low tone 1 second. LED
Field Replace-
flashes continuously.
able Unit (FRU)
Warning (Error
Mode)
Scanner (Green) LED flashes a
coded sequence in concert with the
speaker.
FRU Indication
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-
grammed to display all indications.
4
DURATION COMMENT
The scanner is ready for operation. Scanning is
immediately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming
Mode. Cycle power to exit Programming Mode.
The scanner motor and/or laser have automati-
cally switched off and the unit has entered Sleep
Mode due to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Call systems support for service.
Occurs ONLY upon Volume/Tone button push fol-
lowing a FRU warning. Enables service techni-
cians to identify FRU failures.
Magellan 2200VS/2200VS
®
Ω