Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Full automatic programming
-
This function is used to cook after a certain period of time with a certain duration The food to be cooked
is put into the oven The oven is adjusted to the desired cooking function The oven temperature is adjusted
.
to the desired degree depending on the food to be cooked
First:
Press
button until you see Dur on the timer screen Use
"
"
period for the food you wish to cook.
the screen and the symbols A will begin to continuously light on the screen.
Second:
keep pressing on
the timer screen,
Use " +" "- " button to adjust finishing time,
will appear on the screen and the symbol A will begin to continuously light on the screen
disappears until the time cooking starts.
"
"
You can set a time which can be up
period to the day s time
'
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time and will stop at the set finishing time The timer will give an audible warning and the symbol A will
,
begin to flash After bringing the cooking function and oven temperature
.
any
button
less than 3 seconds,
Pressing"
" for more than 3 seconds set the oven to Manual mode again to use the oven.
Please note Once setting full automatic mode all the time can not be changed Change time means cancle
:
automatice progamme and enter into corresponding mode If you need to reset automatic mode need to
stop setting the current mode to set the automatice mode according to the above steps again
Spectification
1>When setting the date of each function, long press on"+" or "-" for more than 3 seconds, the date
will progressively and rapidly increase or decrease.
2>When setting each of
manual mode.
When setting each of
3>
current setting and
enter
During time function setting
4>
can
cancle
the curent time
We suggest that you run the oven elements for
5>
from their surfaces.
:
"
Press "
" "
button until you see End on the timer screen When you see End on
"
"
" "
23.59
.
.
it will stop the audible warning
-
,
the time function,
if there is
the time function, pressing on
manual mode.
pressing on
,
"+"and
function setting
and enter standby mode.
,
.
"
" button to confirm,
"
"
Press "
hours after the time obtained by adding the cooking
.
.
,
.
none
operation for 5
for more than 3
"
"
f
or more than 3 seconds
"
"
minutes at
15
200
EN-10
.
.
button to adjust cooking
.
" +" "- "
the day s
'
time will appear on
.
"
button to
confirm,
knob
to
position.
"0"
.
m
inutes then it will return to
seconds can cancel
a beep sounds it
,
degrees to burn off any residuce
"
"
the day's time
The symbol
.
" "
Pressing
.
,
.
V.2
Publicidad
Tabla de contenido
