The Sizzix
BIGkick™ Machine is exactly
®
what crafters have been looking for – a
versatile, easy to use and affordable
multipurpose creative system. It is
designed to cut and emboss for creating
unlimited fun projects. Using the Sizzix
Originals™, Bigz™, Sizzlits
and Embosslits™ Dies, as well as Simple
Impressions
Embossing Folders,
®
Textured Impressions™ Embossing
Folders and Texturz™ Texture Plates,
crafters can now express their creativity
in minutes. Start unleashing the
limitless possibilities of your BIGkick to
create a combination of dazzling designs.
Using a Sizzlits or Clearlits Die
Paper
Die
Multipurpose Platform
(Tab 1)
Place Sizzlits Die onto a Cutting Pad with foam side up. Place
paper over the die. Place another Cutting Pad over the paper to
create a "sandwich." For Clearlits Die, place die over photo or
material so that the area to be cut shows through the die.
Then place photo or material and die between Cutting Pads to
make sandwich.
Multipurpose Platform
Place sandwich on Multipurpose Platform and slide Platform
into opening of BIGkick. Note the rotation of the handle and
continue to rotate it in the same direction until the Platform
has passed through the opening and the rollers. Remove
Platform from BIGkick. Your die-cut shape is ready to use!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
precautions should always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the
e) Do not use outdoors.
f) Always place and operate this machine on a clean, flat
g) PINCH HAZARD. AVOID ROLLERS.
h) DO NOT OVERLOAD THE MACHINE.
i) CUTTING HAZARD. AVOID CONTACT WITH THE DIE
j) ADULT SUPERVISION OF CHILDREN RECOMMENDED.
, Clearlits™
®
Before attaching handle, remove protective cap on crank shaft and
®
discard. Then attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw
with hex wrench provided with handle kit. Press end plug over hex
screw until firmly sealed.
Cutting
Pads
"Sandwich"
– When using this product, basic
when this machine is used near children.
manufacturer.
surface.
BLADE.
SAVE THESE INSTRUCTIONS
Assembly Instructions
Crank Shaft
Using a Simple Impressions Embossing Folder,
Textured Impressions Embossing Folder
or Embosslits Die
Simple
Impressions
Embossing
Folder
With Simple Impressions Embossing Folder, Textured
Impressions Embossing Folder or Embosslits Die open, insert
paper, foil or other embossable material, then close like a book.
Simple
Impressions
Embossing
Folder
Multipurpose Platform
(Use no Multipurpose Platform Tabs with 2 1/2" Folders.)
Multipurpose Platform
(Use Multipurpose Platform Tab 1 with Embosslits Dies
and Embossing Folders 4" and wider.)
Place Cutting Pad above and below the closed Folder to
create a "sandwich."
Washer
Hex Screw
End Plug
Handle
Protective Cap
Paper
Cutting
Pads
4" Embossing
Folder