Set Up Your Modem-Router Manually - Cisco Linksys X2000 Manual Del Usuario

Linksys X2000/X3000
Or, if you chose Router only in Step 4:
a. Connect the power cable, then turn on the power switch .
b. Connect the blue cable to the Cable port on the back of your router
and to the modem .
6. If you chose Modem router in Step 4, you are asked to enter your ISP
information .
a. Select your region, ISP, and the DSL settings your ISP has provided .
b. Select your Internet connection type, other Internet settings, and
static settings (if necessary) . All of this information should be available
from your ISP .
7. Follow the on-screen instructions to finish the setup .

Set up your modem-router manually

NOTE
Run the Setup CD-ROM to install the modem-router . If you cannot
run the Setup CD-ROM, refer to the steps below .
NOTE
If you are setting up your modem-router in New Zealand, see
"NOTE FOR USERS IN NEW ZEALAND" on page 9 .
Installation
7