Echo 21560060 Manual De Instrucciones página 2

2
TO ADVANCE LINE
1. Shut engine off, and disconnect spark plug wire. Lay unit on ground
with trimmer head assembly up.
2. Hold drum and turn knob clockwise several turns to allow spool to
disengage pegs from drum.
3. Pull out on spool and rotate counterclockwise to feed additional
trimmer line through eyelets. Each index hole will feed about 32 mm
(1 1/4 in.) of line.
4. Release spool to engage pegs with drum, and pull lines out to remove
remaining slack.
5. Hold drum and turn knob counterclockwise to tighten.
NYLON LINE REPLACEMENT
1. Shut engine off, and disconnect spark plug wire. Lay unit on ground with
trimmer head assembly up.
2. Hold drum (A) firmly, and turn knob (B) clockwise. Remove knob and
spring (C).
NYLON LINE HEAD INSTRUCTIONS
A
B