Cleaning And Maintenance - cecotec CONGA ROCKSTAR 700 X-TREME ERGOFLEX Manual De Instrucciones

ENGLISH
use.
It can be assembled with screws (included with the product), or with an adhesive (included
with the product).
When using the adhesive, make sure to use it on a clear flat surface. Also make sure that the
suction base rests on the floor when hanging the device.
If not, it may fall.
Fig. 9
Charging
The device can be charged in 2 different ways. It can be charged directly through the handheld
vacuum cleaner or the battery can be removed and charged separately.
It is important to charge it when the battery is low. The battery indicator will light as follows:
Steady green: 100-50 %
Steady orange: 50-25 %
Flashing red light: 25-0 %
Disconnect it from the power adapter when the battery indicator is lit up in green.
Fig. 10

5. CLEANING AND MAINTENANCE

Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product's outer housing.
Do not let water enter into the vacuum cleaner.
Keep the appliance in a cool, dry place and out of reach from children.
Do not immerse the device in water and do not clean any of its parts in the dishwasher.
Dust tank
To empty the dust tank, first disassemble the handheld vacuum cleaner from the rest of the
unit. Use the tab on the dust tank to open its cover and empty it. If necessary, shake it gently
to remove all the dust.
Fig. 11
To clean it, press the dust tank release button and turn the dust tank anticlockwise to the
unlock position. Remove it. Use water to rinse it. If necessary, clean it with soap to remove all
the dust.
Recommendation: It is suggested to clean the dust tank after each use.
Fig. 12
Filters
It is suggested to clean the filters regularly to ensure maximum efficiency. They can be cleaned
CONGA ROCKSTAR 700 X-TREME ERGOFLEX 31