Korona 82001 Manual De Instrucciones página 30

OPERATION
The appliance can be operated via the control panel or the remote control.
TURNING THE APPLIANCE ON / OFF
- connect the appliance to a properly installed wall socket and make sure your local voltage
matches the technical data of the appliance.
- A beep sound is heard and on the display appears the current room temperature.
- Push the Power button and the appliance operates in the last used mode.
- If you use the appliance for the first time it is the cooling mode. The indicator light of the
chosen mode lights up.
You can easily turn or move the appliance with the sturdy castor wheels to direct the
airstream into the room.
- Turn off the appliance by pushing the Power button.
- After use, disconnect the appliance from the mains.
By pressing the Mode key, your portable air conditioner can switch between the
following operation modes: Cooling, Fan and Dehumidifying.
COOLING MODE
Press the Mode button once or repeatedly until the respective indicator light (cool) above the
Mode button lights up.
The appliance in now functioning as an air conditioner
use the UP and DOWN button to increase or decrease the temperature buttons.
The temperature setting ranges from 16°c to 31°c which will be indicated on the display.
Press the Speed button to switch between the desired speed level (low or high) of exhaust air.
The respective indicator light light up.
FAN MODE
Press the Mode button once or repeatedly until the respective indicator light (fan) above the
Mode button lights up.
Press the Speed button to switch between the desired speed level (low or high) of exhaust air.
The respective indicator light light up.
DEHUMIDIFYING MODE (DEHUM)
Press the Mode button once or repeatedly until the respective indicator light (dehum) above
the Mode button lights up.
In this mode, the appliance operates in the lowest speed and will start to remove excess
moisture from the air.
ATTENTION:
The appliance is fitted with an internal water collection tank. Once this container has
reached its capacity the appliance stops functioning and the indicator light "water full"
lights up on the control panel.
If you wish to continue using the appliance, the water container needs to be emptied.
Please follow the steps under CLEANING AND CARE – Emptying the Water Tank.
30