CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Unplug the appliance from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature as desired.
6. Put the food back into the appliance.
The LED lights in the fridge freezer cannot be replaced by the user. If the LED lights stop working, please
contact the local authorised service agent.
Cleaning the drip tray and cover
The drip tray is designed to capture any drips of water that may
fall after dispensing.
Please regularly empty and clean the drip tray.
To clean the drip tray and cover:
1. Remove the drip tray cover and then pull the drip tray out of
the dispenser panel.
2. Clean them in warm soapy water. Dry and replace them back
together into the dispenser panel.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
No electricity at power outlet.
not operate.
Appliance is
Cabinet not stable or level.
noisy.
Appliance not
Temperature setting not correct.
cool
Frequent door openings.
Large amount of food recently
added.
Possible causes
16
Possible solution
Check that the plug is correctly connected
and power switched on.
See "Installation" section.
See "Adjusting the temperatures and
functions" section.
Minimise door openings to allow
temperatures to stabilise.