Cautions For Use - Panasonic Lumix DMW-STC20 Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
∫ To remove the teleconverter
1
While pressing the lens
release button on the
digital camera A, rotate
the teleconverter and
lens in the direction of
the arrow until these
stop and then remove
them.
2
While pressing the lens
release button on the
teleconverter B, rotate
the teleconverter in the
direction of the arrow
until it stops and then
remove it.
Note
While using the teleconverter, the maximum aperture of
0
the lens becomes two steps darker.

Cautions for Use

Do not allow insecticides or volatile substances to
0
get onto the unit.
– This can cause deformation of the casing or peeling
Do not aim the unit at the sun or strong light
0
sources.
– The concentrated light may cause fire or damage.
Do not directly touch the unit when using it for long
0
periods in cold temperatures.
– Skin burns may result if you leave the metal parts of
When cleaning, use a soft dry cloth that does not
0
produce dust.
– Do not use solvents such as benzine, thinners,
– Do not use wipes with chemicals.
Do not keep products made of rubber or vinyl in contact
0
with the unit for a long period of time.
Do not disassemble or alter this product.
0
When not using for long periods of time, we
0
recommend storing together with a desiccant (silica
gel).
of the coating.
the unit in direct contact with the skin for long periods
of time in cold places (environments with
temperatures at or below 0 oC (32 oF), such as ski
resorts). Use gloves or similar for prolonged use.
alcohol, kitchen cleansers, etc., as this can cause
problems such as deformation of the casing or
peeling of the coating.
17
DVQX1830
(ENG)

Publicidad

Tabla de contenido
loading

Tabla de contenido