Lenco LS-40 Manual Del Usuario página 7

6. AUX-IN (3.5mm Jack)
An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or computer) can be connected to
Your Lenco LS-40.
Plug a 3.5mm aux cable (not provided) into the AUX IN socket at the rear panel of the Lenco LS-40. (Note: The platter
will stop turning when the 3.5mm jack is inserted)
1. Plug the other end of the Aux cable into the Line out socket of the external source.
2. Turn the Power On/Off knob clockwise until click sound to turn on the unit
3. Rotate the VOLUME knob to adjust the sound level.
Note: This unit complies with ERP2 regulation. Therefore the Lenco LS-40 will switch off to standby when there is
no audio signal (record or Bluetooth) during~20 minutes. To start using it again, please power off/on again.
Lenco
Turntable
Type
Drive Motor
Speed
Wow and flutter
Turntable platter
Cartridge
Type
Stylus
Optimum Tracking force
Output
Frequency response
Crosstalk
Signal-to-noise ratio(S/N)
General
Adapter
Product
Audio Output (Line Out)
Power Consumption
Dimension
Weight
Weight
LS-40
Belt drive full manual
DC motor
33 1/3 rpm, 45 rpm
≤0.35%
253mm
N-10/Ceramic Cartridge 402-M208-015
0.7 mil
4-6 grams
160-380mV (HP-4005)
-28db (10KHz)
10db (1KHz)
40db
input AC100-240V~50/60Hz 0.5A
output DC12V-1A
DC12V-1A
400-600mv
10W
420x375x120mm
approx.3.29KGS LS-40WD
approx.3.28KGS LS-40BK
7