Technical Parameters - YATO YT-85132 Manual De Instrucciones

Unplug the charger from the mains outlet.
Remove the battery from the charging station, by pressing the battery latch button. You should remove the battery from the charging station immediately after the end of the
charging process. Leaving the battery in the mains connected power charging station may result in its irreversible damage.
Due to the fast charging process the charging station has been equipped with a fan, which may turn on during the charging process of the battery pack. Despite the operation
of fan of charging station, the battery may become warm during charging. This is normal. When you are loading the battery in a high temperature environment the temperature
protection in charger can switch on. The charging process is interrupted until the cooling of electronic systems of station, after that it is automatically resumed. In such
conditions, the battery charging time will be longer.

TECHNICAL PARAMETERS

Parameter
Catalogue number
Operating voltage
Mass
Battery
Battery capacity
Power pack
Input voltage
Mains frequency
Nominal power
Output voltage
Output current
Charging duration
O P E
10
R A T I N
GB
Unit of measurement
[V]
[kg]
[mAh]
[V]
[Hz]
[W]
[V]
[mA]
[h]
G I N S
Value
YT-85132 / YT-85133
40 DC / 36 DC
0,7 / 0,7
Li-ion
2500
~230
160
36 DC
3600
T R U C T
50
1
I O N