Supplied Accessories; Placement Of Speakers; Preparing The Remote Control - Panasonic SC-AKX710 Instrucciones De Funcionamiento

Supplied accessories

Check and identify the supplied accessories.
Product numbers correct as of April 2018. These may be
subject to change.

2 AC mains leads
For the United Kingdom and Ireland
(K2CT2YY00089)

1 Ferrite core
(J0KG00000037)

1 AM loop antenna
(N1DYYYY00011)

1 FM indoor antenna
(RSAX0002)

1 Remote control
(N2QAYB001198)

1 Remote control battery

For the United Kingdom and Ireland
1 Antenna plug adaptor
(K1YZ02000013)
CAUTION!
Keep the antenna plug adaptor out of reach of children
to prevent swallowing.
Note:
Use the AC mains lead that is suitable for your household
mains socket.
4
4

Placement of speakers

The left and right speakers are the same.
Use only the supplied speakers.
You can cause damage to the system and decrease the
sound quality if you use other speakers.
Note:
•
Keep your speakers more than 10 mm from the main unit for
ventilation.
•
Put the speakers on a flat safe surface.
•
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced by
magnetism.
•
When you play at high levels for a long period, it can cause
damage to the speakers and decrease the life of the
speakers.
•
Decrease the volume in these conditions to prevent
damage:
–
When the sound is distorted.
–
When you adjust the sound quality.
CAUTION!
• Use the speakers only with the recommended
system. If not, you can cause damage to the
amplifier and speakers and can cause a fire.
Consult an approved service personnel if damage
occurs or if there is a sudden apparent change in
performance.
• Do not modify the speaker or speaker wires as
this can cause damage to the system.
• Do the procedures included in these instructions
when you attach the speakers.
• Do not touch the speaker cone's reverberating
surfaces:
– This may damage the speaker cone.
– The speaker cone may be hot.

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.