Raider RDI-IBW01 Manual Del Usuario página 15

6. Operating tips.
To install a socket, align the square drive with socket receiver and press on until locked
securely in place. To remove socket, pull the socket off while twisting back and forth to dislodge.
Caution: When removing socket or bits from tool, avoid contact with skin and use proper
protective gloves when grasping socket. Accessories may be hot after prolonged use.
Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can
slip off. The torque depends on the impact duration. The maximum achieved torque results from
the sum of all individual torques achieved through impact. The longer the tool is engaged the
higher the accumulated torque value. Maximum torque is achieved in about 45 seconds. The
actual achieved tightening torque should always be checked with a torque wrench.
7. Environmental protection.
environmental-friendly recycling.
Do not dispose of power tools into household waste!
According the European Directive 2012/19/EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power tools that are no longer usable must be collected
separately and disposed of in an environmentally correct manner.
7.2. Battery packs/batteries:
(Li-ion).
Warning! These battery packs contain cadmium, a highly toxic heavy metal.
Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/
batteries should be collected, recycled or disposed of in an environmental-friendly manner.
Defective or dead out battery packs/batteries must be recycled according the Directive
2006/66/EC
7.1. The machine, accessories and packaging should be sorted for
15