GENERAL DESCRIPTION
1. Body
2. Pepper tank
3. PUSH-BUTTON
4. Thickness of grinding – regulation
5. Light
TECHNICAL DATA
- power supply: AA batteries, 4 pcs.
Batteries do not pose
the grinder's equipment
OPERATING
The grinder is intended for pepper grinding.
Grinding of other spices makes guarantee terminated.
Power supply
The grinder is powered with AA alkaline batteries (1.5V).
In order to fix of replace worn batteries, open the cover (1) by twisting it anti-clockwise and
raising it carefully. Insert the batteries as per directions given. Put the cover (1) back and turn
clockwise to lock it.
Used batteries should be thrown away the containers specially designed for this purpose.
Spice grinding
Access to spices tank is provided after removal shield of grinding chamber (1) and pulling
out battery chamber.
After filling the tank with spices, insert battery chamber and fox the cover (1). Mill is
activated by pressing and holding the button.
It is recommended to keep the spices tank 80% full.
In the lower part of the appliance there is thickness regulation available. To set desired
thickness of grinding, twist the regulator (4) clockwise (fine particles) or anti-clockwise
(thick particles).
The light (5), which helps in dosing spices, turns on when grinder is operating.
Do not change the grinding thickness when the grinder is operating.
Avoid humidity. Do not grind the pepper directly over evaporating plates since humidity
may cause clogging of the appliance and damages to the drive.
Cleaning and maintenance
- do not merge the unit in water
- clean the casing with a wet cloth
User's Manual for
Pepper grinder M17
5
7
4
2
3
1