Package Contents; Electrical Safety - DeWalt DC602 Manual Del Usuario

EN GLI SH

Package Contents

The package contains:
1 Nailer
1 Charger
2 Battery packs
1 Safety glasses
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Contact trip
c. Jam clearing latch
d. Cover
e. Headlights/low battery indicator
f Reversible belt hook
g Magazine cover
h. Nail pusher release button
i Low nail indicator
j. Mode selector switch
k. Depth adjustment wheel
l. Contact trip lock-off
m. Battery pack
n. Battery release buttons
o. Charger
p. Charging indicator (red)
q. Protective battery cap
INTENDED USE
The DC602, DC608 cordless nailers have been
designed for driving fasteners into wooden work
pieces.
DO NOT use under humid conditions or in presence
of flammable liquids or gases.
38
These cordless nailers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required for those under
16 years of age.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double insulated
E
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size is
2
1 mm ; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and
adjustment, always remove the battery
pack. Always switch off the tool before
inserting or removing the battery pack.
WARNING: Use only D
packs and chargers.
WALT battery
E