Tabla de contenido
Publicidad
1
4
The finishing of the installation must be done so that it permits dilatation of the stove when functioning. The
installation should never rest on top of the device, nor on the sides. A dilation joint of 0.5 cm. On either side and
of 1 cm. On the top of the device is necessary.
1. Fumes exhaust pipe Ø 200 or 150, according to model.
8
2. Entry of air into the chimney chamber by natural convection.
3. Entry of air into the cassette convection chamber, drawn in by fans.
4. Optional entry of air from the outside used for combustion (optional
lower or rear connection)
7
5. Hot air outlet at the top of the front blown by fans.
6. Hot air outlet driven by fans.
6
7. Hot air outlet of the chimney chamber by natural convection.
8. Optional outlet for hot air to other rooms, blown by fans
5
3
2
Página 15 de 42
Publicidad
Tabla de contenido
