Gwarancja I Serwis; Preparation For Operation - GRAPHITE 58G784 Instrucciones De Uso

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service tel. +48 22 573 03 85
Ul. Pograniczna 2/4 fax. +48 22 573 03 83
02-285 Warszawa e-mail graphite@gtxservice.pl
Sieć Punktów Serwisowych
i pogwarancyjnych dostępna
gtxservice.pl
GRAPHITE zapewnia dostępność części zamiennych oraz materiałów
eksploatacyjnych dla urządzeń i elektronarzędzi. Pełna oferta części
i usług na gtxservice.pl.
Zeskanuj QR kod i wejdź na gtxservice.pl
do napraw gwarancyjnych
na platformie internetowej
TRANSLATION OF THE
ORIGINAL INSTRUCTIONS
ELECTRIC MIXER
58G784
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FURTHER USE.
DETAILED SAFETY REGULATIONS
• Ensure the mains voltage matches the voltage on the tool label.
• Do not use the mixer in environments with potentially explosive
atmosphere. Do not mix solvents or substance containing
solvents with ignition temperature below 210°C.
• Do not wind the power cord around any part of the mixer body.
• Switch the mixer on and off only when the mixer paddle is
immersed in the tub.
• Ensure the tub for mixing is well fixed.
• Do not put your hands or any other objects into the tub when
mixing.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always a
small risk of operational injuries.
CONSTRUCTION AND USE
Electric mixer is a power tool designed for continuous use for
building industry and other fields. Possibility to use various mixing
tools appropriate for mixed substances allows for mixing of cement,
gypsum, stucco, paint, plaster, self levelling underlayment and other
chemicals. Depending on the composition being mixed and type of
the tool used, it is not recommended to mix more than 90 litres of
the product.
Use the power tool according to the manufacturer's instructions
only.
DESCRIPTION OF DRAWINGS PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
Mixer spindle
1.
Gear switch
2.
Switch
3.
Switch lock button
4.
Mixing paddle
5.
Wheel for speed control
7.
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
Mixing paddle - 2 pce
1.
Transport case - 1 pce
2.

PREPARATION FOR OPERATION

Disconnect the power tool from power supply.
• Screw the shaft into the mixer spindle (1) (fig. A).
7