LevelOne WAP-8111 Guía De Instalación Rápida página 2

English
Reset Button
POE
Power Port
LAN Port
2.4G/5G LED
SYS LED
LED / Button / Interface
LED / Button / Interface Description
The Device is powered LED will be on when AP is
Powered
powered on.
The 2.4G/5G LED is on when 2.4GHz/5GHz
2.4G/5G Wireless is enabled.The LED blinks when
transmitting/receiving 2.4G/5G wireless data.
The LED blinks twice per second when the
SYS system is operating properly, and it will blink
slower if the system is under heavy load.
The LAN port is used to connect to network
LAN
devices, such as a switch.
With the AP powered on, press the Reset button
with a bent paperclip for 5 seconds until the
Reset
Link/Act LED goes off. The AP Will restart itself
and reset the device to factory default settings.
2