Maintenance And Care - AL-KO solo 107 L-S Traducción Del Manual De Instrucciones Original

Tabla de contenido

Idiomas disponibles

Trimming

1. Examine the terrain and determine the desi-

red cutting height.

2. Guide and hold the string head at the desired

height.

3. Swing the device from side to side in a

sweeping, scythe-like motion.

4. Always keep the string head parallel with the

ground.

Close trimming

1. Hold the device so that it is tilted forward at a

slight angle and moves just above the ground.

2. Always trim away from your body.

Trimming along fences and foundations

CAUTION!

Risk of injury from uncontrolled kick-

back!

Do not use cutting blade near solid obst-

acles.

1. Move the device slowly and with care, ensu-

ring that the string does not impact with obst-

acles.

Trimming around tree trunks

1. Guide the device slowly and carefully around

tree trunks, ensuring that the cutting string

does not touch the tree bark.

2. Mow from left to right around tree trunks.

3. Cut grass and weeds with the tip of the string

and keep the string head tilted slightly for-

wards.

Trimming along stone walls, foundations

and tree leads to increased string wear.

Mowing

1. Tilt the string head to the right at an angle of

30 degrees.

2. Move the handgrip to the desired position.

CAUTION!

Risk of injury / damage to property

from ejected foreignobjects!

Remove foreign objects from the working

area.

Mowing with the cutting blade

When mowing with the cutting blade, the cutting

blade should be guided in a curving horizontal mo-

tion from one side to the other.

Before using the cutting blade, observe the follo-

wing additionalinstructions:

Use the shoulder strap.

Check that the cutting blade is correctly fitted.

Wear protective clothing and eye protection.

Do not use weed cutter blades for cutting

brushwood and young trees.

CAUTION!

Only use original cutting blades and

accessories! Improper accessories can

lead to injuries and malfunctions of the

machine!

Non-original parts can lead to injuries

and malfunctions of the machine!

Switch off the engine

1. Release the gas lever and let the engine idle.

2. Set the ignition switch to "STOP".

CAUTION!

Risk of injury!

The engine continues to run after it is

switched off.

Lengthening the cutting string

1. Let the engine run at full throttle and tap the

string head on the ground.

The string is lengthened automatically.

The cutter on the guard shortens the

string to the permissible length.

Cleaning the guard

1. Switch off the device.

2. Carefully remove mowing debris with a screw-

driver or similar tool

Clean the guard regularly to prevent the

shaft tube from overheating.