Product Specifications; Specifications - Sharp LL-T1803-H Manual De Funcionamiento

Product specifications

LCD display
46 cm measured diagonally
TFT LCD module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
16.77 million colors (8 bit)
Brightness (max.)
220cd/m 2
Dot pitch
0.2805(H) 0.2805(V) mm
Contrast ratio
400:1
Angle of visibility
Left-right 170°; Up-down 170°
Screen display size
Horizontal 359 mm x Vertical 287.2 mm
Video signal
Analog: Analog RGB (0.7Vp-p) [75Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital screening (enlargement of display to
correct VGA/SVGA/XGA)
[expansion (total screen surface)]
Plug & Play
VESA DDC1/DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
Input signal terminal
Mini D-sub 15 pin (3 row), DVI-D 24 pin
Screen tilt
Upward 0° -15°
Screen swivel
90° from left through right (Turn table type)
Power supply
AC100 - 240V, 50/60Hz (Use special AC adapter,
type NL-A61J of Sharp Corporation.)
Temperature of operating environment
5 - 35°C
Power consumption
Maximum 49W (Standby state: 3.5W)
(Use special AC adapter.)
Dimensions
422(W) x 217(D) x 420(H) mm
Weight
Approx. 7.0kg
Display area only, approx. 5.4kg

Specifications

Dimensions (Units: mm)
Special AC adapter:
Analogue signal cable: Approx. 1.8m
22
422
267
217
Approx. 1.8 m
Approx. H 110 mm x D 60 mm x H 30 mm