Preparing the pressure equipment
Attach compressed air cartridge
Screw the stopper out of the connecting thread for the
compressed air cartridge.
Screw the seal cap off the compressed air cartridge.
Check the fitting and the connecting thread for the compressed
air cartridge for foreign matter and soiling.
Clean the fitting and connecting thread, if necessary.
Check the condition of the pressure equipment (see page 14).
16
WARNING
Operating with unsuitable compressed air
cartridges can cause damage on the pressure
equipment.
Operate the pressure equipment only with
compressed air cartridge of type KT-300,
KT-470, KT-690 and KT-900.