Intended Use; Residual Risk; Equipment Setup And Use; Prior To Use - Hillrom A-80200 Instrucciones De Uso

INSTRUCTIONS FOR USE

2.5 Intended use:

The Armboard is designed to position and support the patient's non operative arm in
a variety of surgical procedures including, but not limited to spine surgery. These
devices are intended to be used by healthcare professionals within the Operating
Room setting.

2.6 Residual Risk:

This product complies with relevant performance, safety standards. However, device,
patient harm from misuse, device damage or functional hazards cannot be
completely excluded.

3 Equipment Setup and Use:

3.1 Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

3.2 Setup:

a. Hold the Armboard parallel to the side rail. Tilt the
Armboard as shown and hook the upper jaw over the
side rail. Allow the Armboard to return to horizontal.
The latch will "snap" into place when it locks onto the
rail.
b. To articulate, pull lock-knob and rotate
Armboard. Release lock when in desired
position.
Document Number: D-720442
Version: C
Page 12
Step 1
Step 2
Issue Date: 16 MAR 2020
Ref Blank Template: 80025117 Ver. F